|
|
Technical Guides
Please click on this link below to see our Fitting Instructions
Fitting Instructions for Garage Door Spares
Cones & Cables - Roller Spindles - Springs - Locks
You will be diverted to our main website - www.garagedoor-spares.com
Most of the technical guides have been produced by myself, they are designed in a step by step easy to follow format which will help with the fitting of new cables, roller spindles or general routine maintenance.
*I am constantly updating and adding more technical guides, if the technical guides for your garage door part are not yet listed please ask for help.*
The Fitting Guides will help with:
How to replace cones & cables to up and over garage doors
How to change garage door roller spindles
How to add more tension to a garage door main spring
*SAFETY NOTE*
Before attempting to carry out any maintenance or repairs to a Garage Door please read carefully any Instructions provided for that particular make of door.
The springs on Garage Door are usually held under a good deal tension!
Before any work is attempted on the Garage Door, the tension on the spring or springs must be isolated or released, only after this has been done can any work be done in saftey!
Please make sure before any work is carried out that you have read any Instructions carefully and you also have the correct parts and tools neccasary to complete the work!
All work is undertaken at your own risk
*All work is undertaken at your own risk*
Please click on this link below to see our Fitting Instructions @
www.garagedoor-spares.com
Cones & Cables - Roller Spindles - Springs - Locks
|
